{"id":210,"identifier":"LOR-00210","url":"https://lifeofresearch.com/theses/210","title":"PERFORMANCE OPTIMISATION OF HYBRID-ELECTRIC PROPULSION SYSTEMS FOR NEXT-GENERATION AIRCRAFT","abstract":"Aviation must reduce its climate impact while demand for short-haul regional connectivity\r\ncontinues to grow. Hybrid-electric propulsion, which combines gas-turbine engines with\r\nbattery-driven electric motors, is a candidate pathway for regional aircraft because it can shift\r\npart of the energy supply to electricity, downsize the thermal engine and allow the engine to\r\noperate nearer its best-efficiency point. Its benefit, however, depends on a delicate balance\r\nbetween the mass of batteries and electrical components, the energy and power requirements of\r\nthe mission, and the way power is shared between the two energy sources in flight.\r\nThis thesis develops a reduced-order, mission-based framework for the sizing and performance\r\noptimisation of parallel hybrid-electric turboprop aircraft in the 50-seat regional class. The\r\nframework couples (i) a closed-loop mass and energy sizing model that includes battery energy\r\nand power constraints, part-load gas-turbine efficiency and a hybrid-propulsion mass build-up,\r\n(ii) a global optimiser (differential evolution) acting on the degree of power hybridisation Φ\r\nP\r\nand\r\nenergy hybridisation Φ\r\nE\r\nunder a take-off-mass constraint, and (iii) a mission-level\r\nenergy-management optimiser based on the Karush–Kuhn–Tucker conditions of the power-split\r\nproblem.\r\nFor a 17,514 kg reference aircraft designed for a 400 km mission, the study shows that the fuel\r\nbenefit of hybridisation is strongly technology- and range-dependent. With a take-off-mass\r\ngrowth limit of 15 %, the fuel-optimal design saves 1.4 %, 6.2 % and 14.1 % of trip fuel at\r\npack-level battery specific energies of 300, 500 and 800 Wh/kg respectively, with the optimum\r\nlying on the mass constraint in every case (ΦP ≈ 0.30–0.33). A cost-optimal design, using the\r\nenergy-price and battery-degradation assumptions of Chapter 3, collapses to a minimal level of\r\nhybridisation. Fuel savings fall rapidly with design range: at 500 Wh/kg an energy hybridisation\r\nof 20 % saves 11.9 % of fuel at 200 km but increases it at 600 km. At equal battery energy,\r\noptimal in-flight power management reduces mission fuel by 3.4 % relative to a cruise-only\r\nelectric-assist strategy and 2.3 % relative to constant-share control. One-at-a-time sensitivity\r\nanalysis identifies the structural mass fraction, electrical-chain efficiency and battery specific\r\nenergy as the dominant uncertainties.\r\nThe thesis concludes that hybrid-electric propulsion is most promising for short-range missions\r\nand for battery technology well beyond today's pack-level values, and that energy-management\r\noptimisation is a low-cost route to additional benefit. The principal contributions are a\r\ntransparent, reproducible conceptual-design framework, a quantified technology and range map\r\nof hybridisation benefit, and an optimal power-split formulation that exposes the interaction\r\nbetween battery energy budget and gas-turbine part-load behaviour.","authors":[{"name":"Dominic Namachila","affiliation":"University of Cape Town","orcid":""}],"type":"thesis","license":"CC-BY-4.0","keywords":[],"publication_date":"2024-05-25","version":1,"views":73,"downloads":35,"created_at":"2026-11-10 12:58:44","doi":"","source":"","source_url":"","files":[{"id":230,"name":"Hybrid_Electric_Propulsion.pdf","size":970996,"mime":"application/pdf","downloads":35,"download_url":"https://lifeofresearch.com/theses/210/files/230/Hybrid_Electric_Propulsion.pdf"}]}